Skip to content

Which compress do I need for which wound?

Welche Kompresse brauche ich für welche Wunde? - DocMed GmbH
Which compress is suitable for your wound depends primarily on the type of wound, amount of wound fluid, sterility requirements, and other material properties. For minor wounds, sterile gauze or non-woven compresses may be considered; for heavily weeping wounds, highly absorbent compresses can be useful. Ointment dressings can be used when minimal adhesion to the wound is required. [1,2,6] 

Summary

Which compress is suitable for your wound depends primarily on the type of wound, the amount of wound fluid, sterility requirements, and other material properties. For smaller wounds, sterile gauze or non-woven compresses may be considered; for heavily exudating wounds, highly absorbent compresses may be useful. Ointment compresses can be used when low-adhesion wound contact is required. [1,2,6]

Which compresses are suitable for different wounds?

Compresses differ significantly in terms of material, absorbency, and intended use. The following overview serves as a starting point:

Wound situation Possible compress type Typical property
Small acute wound sterile gauze compress absorbent, flexible [2, 6]
Abrasion or superficial wound sterile compress or suitable wound contact dressing Low-adhesion coverage [12]
Slightly exudating wound gauze or non-woven compress absorption of wound fluid [6]
Moderately to heavily exudating wound absorbent compress high absorption of wound fluid [9]
Sensitive wound area ointment compress low-adhesion wound contact [10]
Wound around a drain, probe, or catheter slit compress cut-out for inlet or outlet [11]
Chronic wound depends on wound fluid and wound condition individual wound care required [7]

Attention: For chronic, deep, infected, or poorly healing wounds, the selection of the wound dressing should be made by medical professionals.

Gauze compress or non-woven compress? What is the difference?

Gauze compresses typically consist of woven bandage gauze. An example from the DocMed range are the MaiMed non-sterile gauze compresses made of 100% cotton and 17-thread bandage gauze according to DIN EN 14079. They are soft, absorbent, and available in various sizes. [2,3]

Non-woven or multi-purpose compresses, on the other hand, consist of a non-woven material or fiber blend.
They can be a soft alternative to classic bandage gauze. For direct contact with open wounds, it is crucial whether the specific product is intended for this purpose and, if applicable, sterile.

When are sterile compresses used?

When treating open wounds, a sterile wound dressing intended for the respective purpose should be used.
Sterile compresses are offered in sterile packaging. Before use, the packaging integrity and, if applicable, the stated expiration date should be checked. At DocMed, for example, the sterile MaiMed gauze compress is available as an 8-ply woven version in a peel pack. Sizes offered include 5 × 5 cm, 7.5 × 7.5 cm, and 10 × 10 cm. Non-sterile compresses, by contrast, are suitable for certain cleaning, padding, or preparatory tasks, provided no sterile wound dressing is required. [2,3,5,6]

Which compress is suitable for exudating wounds?

When wound fluid leaks heavily, the absorbency of the compress is decisive. Wound fluid is also medically referred to as wound exudate. Classic absorbent compresses therefore have a multi-layer structure. A relevant example from the DocMed range is Zetuvit by Hartmann. The sterile version has an absorbent cellulose core and a moisture-repellent backing. For larger quantities of wound fluid, DocMed also carries Zetuvit Plus in various sizes. Zetuvit Plus is intended as a superabsorbent wound dressing for heavily exudating wounds. [1,9]

When are ointment compresses useful?

Ointment compresses form a contact layer close to the wound and are intended to reduce sticking to the wound surface. In this respect, they differ significantly in function from a classic absorbent compress. The Hartmann Atrauman ointment compress, for example, consists of hydrophobic polyester tulle and is impregnated with an active-ingredient-free ointment mass. The product is offered sterile and individually sealed.

When are slit compresses used?

Slit compresses are designed for dressing around inlets or outlets. Thanks to the pre-made slit, they can be positioned around catheters, drains, cannulas, or similar inlets and outlets without having to cut a normal compress yourself. [8]

NOBAMED slit compresses

3M/Solventum Topper slit compresses

Lohmann & Rauscher Vliwasoft slit compresses

What size should a compress be?

The appropriate size depends on the wound area, the amount of exudate, and the manufacturer's instructions for the respective product. For Zetuvit Plus, HARTMANN recommends, for example, choosing a wound dressing that overlaps the wound edges by at least 1–2 cm. [1,9]

Relevant compresses from the DocMed range in comparison

Product Type Main properties & areas of application
MaiMed sterile gauze compresses Gauze compress Sterile gauze compress made of 100% cotton for sterile wound care, including for open and post-operative wounds. [2]
MaiMed non-sterile gauze compresses Cotton gauze, DIN EN 14079 Non-sterile gauze compress made of 100% cotton for general wound care; must be sterilized beforehand for open or post-operative wounds according to the manufacturer. [2]
Hartmann Zetuvit Absorbent compress For exudating wounds to absorb exudate, blood, and pus. [1]
Hartmann Zetuvit Plus Superabsorbent wound dressing Superabsorbent wound dressing for heavily exudating wounds. [9]
Hartmann Atrauman Ointment compress For superficial acute and chronic wounds; also intended for patients with sensitive skin. [10]
NOBAMED slit compresses Slit compress For dressing around drains, probes, or catheters. [11]

How is a compress applied correctly?

Prepare hands: Thoroughly clean or hygienically disinfect hands.

Clean wound: Clean the wound according to medical specifications.

Open packaging only immediately before use: Open sterile packaging only immediately before application.

Place compress with minimal contact: Try not to touch the wound-facing side of the sterile compress and position it directly in the center over the wound.

Apply fixation: Secure the wound dressing properly with suitable fixation material (e.g., fixation bandage, fixation fleece, or adhesive tape).

Observe dressing changes: Renew the dressing regularly according to the wound condition and professional recommendations. [5]

Note: Wounds that do not heal over a longer period despite treatment may be chronic. In this case, a medical evaluation is important to determine possible causes and tailor further wound care accordingly [6, 7].

Sources

[1] PAUL HARTMANN AG: Zetuvit® sterile – Manufacturer information on the sterile absorbent compress for exudating wounds and for the absorption of exudate, blood, and pus. Last access: 29.09.2026.

[2] MaiMed GmbH: Wound care / Compresses – Manufacturer information on gauze and non-woven compresses as well as their material and product properties. Last access: 29.09.2026.

[3] DocMed GmbH: Gauze compresses – Assortment and product information on sterile and non-sterile gauze compresses. Last access: 29.09.2026.

[4] DocMed GmbH: Compresses – Assortment overview of various compresses and wound dressings. Last access: 29.09.2026.

[5] DRACO: Wound compendium – Expert information on dressing changes and practical wound care. Last access: 29.09.2026.

[6] ESE International: “Compresses: What are they and how are they used?” – Basics on compresses, material, and application. Last access: 29.09.2026.

[7] gesund.bund.de: Chronic wounds – Patient information from the Federal Ministry of Health on chronic wounds, causes, and treatment. Last access: 29.09.2026.

[8] PAUL HARTMANN AG: Medicomp® drain – Manufacturer information on the slit compress for dressing in the area of cannulas and tubes. Last access: 29.09.2026.

[9] PAUL HARTMANN AG: Zetuvit® Plus – Manufacturer information on the superabsorbent wound dressing for moderately to heavily exudating acute and chronic wounds, regarding product structure and size selection. Last access: 29.09.2026.

[10] PAUL HARTMANN AG: Atrauman® – Manufacturer information on the active-ingredient-free ointment compress for superficial acute and chronic wounds; note on the required absorbent secondary wound dressing in case of exudate. Last access: 29.09.2026.

[11] NOBAMED Paul Danz AG: SLIT COMPRESSES-sterile, REF 751207 – Product data sheet for the sterile slit compress for entry/exit points of probes, drains, catheters, Kirschner wires, and external fixators. Product data sheet Rev. 4 from 26.05.2023. Last access: 29.09.2026.

[12] Smith+Nephew: CUTICERIN™ – Manufacturer information/instructions for use of the low-adhesion wound contact layer for superficial exudating wounds, including abrasions. Last access: 29.09.2026.

Back to blog
Related products